Lesson: The Back Up In Cart

Lesson: The Back Up In Cart

Many draft tests will require your dog to back out of cart and to back in cart. The length of the back can vary from 1 foot to 5 feet, but just to be safe, teach your dog to back 20 feet. Teaching your dog to back is an unnatural behavior, and there are countless ways to teach a dog to back. I only explained a couple in this video, and I may be updating it with other methods over time.

Lesson: Harnesses, Harnessing, and Hitching

Lesson: Harnesses, Harnessing, and Hitching
Here’s a video on harnesses and harnessing.  I may make other videos  with more details, but here’s the basics to get you started.

Here’s a video on hitching your dog from a sit position.  It works the  same way from a stand position.  Mouse just happened to be sitting. 

Balancing this Front Heavy Cart

This cart showed up at a training session, and the owners had a problem.  The judge at the previous test deemed this cart unbalanced.  How could an empty cart be unbalanced?  Upon further inspection, it was noted that the shafts on this cart were particularly heavy, and thus, it put a substantial amount of weight in the front of the cart (in front of the axle).   To balance this cart, we added a counter weight.  That might seem odd, but we added the counter weight BEHIND the axle, thus, balancing the cart on both sides of the axle. 

The best way to do it would have been to measure the weight of the shafts, and then to add that exact weight to the back section of the cart.  This was a quick way to solve the issue for now.



What’s the difference between drafting, carting, and weight pull?

Most people I know use drafting and carting interchangeably. Drafting or
carting is usually pulling a cart, wagon, or travois. These apparatuses have
shafts and brakes so that the rig can be maneuvered through turns. IMO,
drafting or carting (whichever term one prefers to use) is not about sheer
weight, but rather about how well the dog and handler can maneuver a cart to do
everyday farm activities.

Weight pull is the activity that involves heavy duty pulling. During weight
pull competitions there are no shafts, and the goals is to test how much weight
a dog can pull. The weight can be either on a cart(wheels or rails) or on a
sled on snow. Weight pull carts and sleds do not have shafts as the goal is not
about maneuverability, but about weight pull only. For people who do use their
dogs on the farm to do work, I usually hear the terms hauling or pulling. I
only hear the specific term weight pull when speaking about the sport.

Just to make things confusing, it is common to cross train dogs in both sports
to improve both sports. My dogs are active in both drafting/carting and weight
pull. I might have my dog pull a 100 lb load in his draft cart to train for
weight pull for a miles to build endurance. Or I might have might dog
participate in weight pull to build up strength and confidence.

To make things even more confusing, if you look through breed club rules and
titles, most all carting/drafting titles are called Draft titles or Draft tests,
even though people refer to it as carting. ND stands for novice draft. DD
stands for draft dog (the open title in GSMD). There’s also team draft which is
sometimes referred to as brace.

Tackling hills

Tackling hills in drafting is serious business.  While it seems like a simple task, taking a dog up or down a hill in a cart can pose many risks.

bullet Wet ground and loose gravel can cause the dog to loose footing and slip.  Going up incorrectly, a loaded cart can drag a dog down a hill.  Going down incorrectly can have a cart run up on the dog and cause the brakes to fail resulting in serious injury. 
bullet A hill that is too steep can put undue pressure on a dog in either direction. 
bullet Asking a dog to hold a loaded cart on a hill in either direction pointed in the incorrect direction can cause undue stress on the dog either pulling or pushing a dog down a hill. 
bullet I’ve been on hills so steep that even empty carts were rolling down a hill into a pond.  Unfortunately, the organizer of the event insisted that we position the carts parallel to the slope instead of perpendicular to the slope. 


To protect against these problems, hills should always be tacked.  This concept is not new nor is used only in dog drafting.  The concept of tacking, sometimes called switchbacks, is used in sailing, windsurfing, biking, skating, and driving.  In sailing and windsurfing, the operator sails or surfs at an angle towards the wind, not directly towards it.  In biking, skating, or driving, it is easiest to go up a hill at 45 degree angles instead of dead up the hill.  That method reduces the steepness of the hill and makes it easier to go up or town.  If you want to test this theory, just grab a pair of skates and try to go straight up or down a steep hill.  Make sure you wear a helmet and protective gear first.  You’ll quickly learn that you can bleed off speed by tacking down the hill or ease the steepness by tacking up the hill.  In driving, cars with short clearances that need to make it up or down a steep incline should approach at an angle either way.  Here’s some photos to illustrate the concept.
 
If you’re familiar with Lombard Street, here’s a photo of cars tacking down this 27% grade hill.  Read more details here

Tacking a hill (up or down) is pretty self-explanatory and straight forward.  You traverse a hill by going up diagonally at a comfortable angle.  You will be traveling more distance to go up the hill, and it will be at a less steep slope.  More importantly, it will be safer!  I also go up curbs and small hills with my own dogs at angles.  When leaving your harnessed and hitched dog or cart (without the dog) on a hill, make sure that they are positioned perpendicular to the hill.  You don’t want the cart or dog to be overcome by the weight of the cart when on a steep hill to cause a runaway. 

Here’s a photos of some cars parked perpendicular to the slope (correct).  If you don’t do this in San Francisco on some extremely steep hills, you’ll have some runaway cars.  

Oct. 17th Drafting clinic

Hi Everyone,

The first drafting clinic of this season start tomorrow, Oct. 17th, 9:00 am.  Class size is limited so please contact me if you plan to show up.  I will email the location when you respond. jennie@romanreign.com

Dogs need to be in control, and teams should have a healthy working relationship.  Training collars and treats are permitted.  No equipment needed on our first day.

See ya there!

Preparing for a Draft Test

I got returned from a draft trial just last night, and with the weekend fresh in my mind, we’re going to go over some draft trial tips and info before diving back into training posts. Here are some skills that I encourage my draft students to master before going to a draft trial.

Basic Control – both dog and handler will need to have a solid working relationship with several commands. For basic control, the dog that can qualify in rally obedience should have enough control for a draft test’s basic control.  The dog needs to:

  • sit on command
  • stay in position for 3 minutes
  • heel with the handler (not necessarily in heel position)
  • turn left
  • turn right
  • halt (no sit needed)
  • about turn
  • recall (come when called)

Basic control is NOT scored like competitive obedience and the requirements are not as strict.  The dog does NOT need to be in heel position at all time, and you may talk to your dog during the entire test (except the stays).

Harness and Hitching:  You should be able to harness a dog correctly, and hitch a dog correctly.  In my opinion, harnessing and hitching should not be a jerry-rigged last minute chore.  It is first and foremost, the most crucial part of safety in dog drafting.  Dog drafting is a sport that can be very dangerous to you and your dog if do not do it properly.  Thusly, I am a stickler for safe harnessing and hitching.  While I have not failed someone for minor issues with harnessing, I cannot pass a dog that is in an unsafe rig.  Future posts on that.

Maneuvering course: My rule of thumb is if a dog can master the following exercises with only voice or hand commands and no treats, then they can pass any draft test.  Yes, they are much more difficult than what is required, but I always try to train for tougher than the test. 

  • 360 clockwise pivoting on the inside wheel, but not moving it
  • 360 counter-clockwise pivoting on the inside wheel, but not moving it
  • Back up in cart 10 feet in a straight line
  • Back up unhitched 10 feet in a straight line
  • Pull through narrows that are two (yes, that’s two) inches wider than the cart for 15 feet
  • Pull through high narrows that are two inches wider than the cart for 15 feet
  • Parallel Park with no leash guidance

Freight Haul:

  • Out of sight stay for 5 minutes
  • Properly load and balance a cart
  • Navigate a steep hill up and down
  • Halt a dog
  • Maintain control of a dog that likes to cart quickly

Happy Training!

Drafting Seasons Starts

Photo by Michael Taylor

A big congrats goes out to Janice Swenson and Brooke for earning their Water Rescue Dog (WRD) title last weekend at Lake Kiowa, TX.  Water rescue is an extremely difficult sport, and it requires a fit, obedient, and willing dog.  Don’t forget to congratulate Janice and Brooke next time you see them.  Now that the water rescue season is over, it’s time to start thinking about drafting.

We haven’t finalized the location yet (East Austin), but we’re thinking about starting training on Oct. 17th, 9 am.  Get your dogs working on obedience and get those carts out….it’s drafting time!

Siwash Harnesses – freight weight and the carting

Frequently, people ask me about harnesses.  Which one is better?  I can’t say that of the two siwash harnesses: freight/weight or carting, that one is better than the other.  The both have advantages and disadvantages.  I have somewhere in the neighborhood of 15 harnesses now, and the only one I haven’t tried for carting is the parade harness.  I’m not a huge fan of the parade harness, and I’ve heard through the grapevine that many other judges aren’t either.  I’ll go into detail about that on another post along with specialty harnesses including the Wilczek, weight pull harnesses, and leather harnesses.

Mouse has a freight/weight siwash with a cinch and cinch loop added because I want to do weight pulling and carting. However, the freight harnesses is too “wimpy” for real competitive weight pulling.  Do not take this to a weight pull.  You will need a true, heavy duty weight pull harness to do some serious work.  The disadvantages of a frieght/weight siwash is that it is a one-piece so you must take the entire thing off to let
the dog potty or else hook the spreader bar up to the shoulders of the dog so they can walk around without tripping. On the other hand, being a one-piece is also an advantage as it is easier to
untangle and easier to put on.

The carting harnesses usually is more complicated than the freight weight harnesses. There is the neck piece, belly band, and 2 traces. You MUST be absolutely certain that the 2 traces are the same length so that the weight is distributed correctly. These two traces either attach to a tree or 2 points on the vehicle. The advantage of the carting harnesses is that you can just unhook the traces without having straps hanging off everywhere.

I personally lean towards the carting harness.  It’s just a personal preference.  There is no performance differences between the two harnesses if used properly.

Proudly powered by WordPress | Theme: Baskerville 2 by Anders Noren.

Up ↑